Iipesenti kwi-Motion (i-WIM) zibaluleke kakhulu kulawulo lweendlela zangoku, zibonelela ngedatha echanekileyo kwimilinganiselo yemoto ngaphandle kokufuna izithuthi ukuba ziyeke. Ezi nkqubo zinokusetyenziswa kukhuseleko lwebhulorho, ubunzima bemveliso, kunye nokunyanzeliswa komthetho wendlela, ukuphucula ukhuseleko lwezibonelelo kunye nokusebenza kakuhle.
Izicelo zeMveliso zeMemo kunye neempawu
Ukunyanzeliswa komthetho wetrafikhi
Ukunyanzeliswa komthetho wezendlela, iinkqubo ze-Imko ze-Imko zibonelela:
1.Isimbo sokunyanzeliswa:Ukuchonga ngokufanelekileyo izithuthi ezilayishwe ngokupheleleyo, ukuqinisekisa ukuba kuphela izithuthi ezingahambelaniyo zimiswe kwaye zihlolwe.
2.Ukunyanzeliswa ngokuthe ngqo: cUkubek'esweni kwe-ontines
Izibonelelo:
● Ukhuseleko ezindleleni
● Iindleko zokulungiswa kwendlela
● Ukunyanzeliswa komthetho ngokufanelekileyo
Ukukhusela ibhulorho
Ubunzima bendawo ekuhambeni kweenkqubo (ii-WIM) zezixhobo ezifanelekileyo zokukhusela izibonelelo zebhulorho. Ezi nkqubo zibonelela:
I-WopermoperIdatha echanekileyo kwimithwalo yezithuthi, ebalulekileyo ekuvavanyeni ibridge's eshiyekileyo yeBridge eshiyekileyo kunye nokucwangciswa kwesondlo.
I-2FART YEMPILO YEMPILO:Sebenzisa izifo zegesi
3.Ukuba izithuthi ezigcwalisiweyo:Ngokuchonga kunye nokuphinda uhlengahlengise izithuthi eziphezulu, sinceda ukunciphisa umngcipheko womonakalo kwiibhulorho ezibalulekileyo.
Izibonelelo:
● Ukubala okulindela okuchanekileyo kweebhlorho
● Ukuncitshiswa komngcipheko wokusilela kwentlekele
● I-Lindespan eyandisiweyo yeziSeko zebhulorho
Ubunzima bemizi-mveliso
Kwiinkqubo zemizi-mveliso ezinje ngezityalo zesamente, imigodi, neenkqubo ze-POG, iinkqubo zika-Pom.
1.Ukusebenza ngokufanelekileyo nangokufanelekileyo:Ezi nkqubo zinokulinganisa iilori xa intshukumo, ukwandisa kakhulu ukungena kunye nokunciphisa amaxesha okulinda.
2.Umgaqo-nkqubo:Iqinisekiswe kwi-OIML R134 imigangatho, iinkqubo zethu zibonelela ngemilinganiselo yenqanaba lemilinganiselo ngokusemthethweni ebalulekileyo ekuhlawuleni kunye neenjongo zolawulo.
Ukuphazamiseka kwe-3.miman:Ukufakwa ngokukhawuleza malunga nokuphazamiseka okuncinci kwimisebenzi eqhubekayo kunye neemfuno zolondolozo olusezantsi.
Izibonelelo:
● Ukwanda kokusebenza okusebenzayo
● Ukuthotyelwa kwemigangatho yezomthetho
● Ukuncitshiswa kwexesha lokuphumla
ISIQINISEKISO: IZIXHOBO ZOKUGQIBELA
I-Impko's's Piezoeleectric ye-Piezomic yenynamic ubunzima, ngakumbi imodeli ye-CET8312, lilitye lemali yeenkqubo zethu ze-Wim. Aba bavo banikezela ngeempawu ezininzi eziphezulu kunye neeparamitha eziphambili:
I-1.Highcly Ukuchaneka: Izinzwa ze-Partz ibonelela ngemilinganiselo yezisindo ezichanekileyo kunye nenqanaba le-1-2% kwiimeko eziqhelekileyo zendlela, ukuqinisekisa ukuthembeka kuqokelelo lwedatha.
2.Ukuxakeka:Yenzelwe ukumelana neemeko ezixekileyo zokusingqongileyo, ezi zinzwayo zinamandla kwaye zilungele ukusetyenziswa kwexesha elide.
3.Ukulondolozwa: Ngemilinganiselo emincinci yolondolozo, banciphisa iindleko zokusebenza.
Ixesha lokuphendula le-4PID:Amaxesha okuphendula ngokukhawuleza afunekayo ekulinganiseni ngokuchanekileyo ubunzima bezithuthi ezihambayo.
5.Uk'osi: Ifanelekile kuzo zombini iinkqubo eziphezulu kunye nesantya esiphezulu se-Wim, isantya esisezantsi se-Wim, izilonda ze-comptz eqinisekisa ukuba bhetyebhetye kwaye zilungelelane neemeko ezahlukeneyo zendlela.
Iparamitha zobugcisa:
● Umda wecandelo:(48mm + 58mm) * 58 mm
● Ubude: 1m, 1.5m, 1.75m, 2m
● Umthamo: ≥ 40t
● Ukulayisha ngaphezulu: Ingcono kune-150% FS
● Umthwalo:I-2 ± 5% pc / n
● Uluhlu lwesantya:I-0.5 ukuya kwengama-200 km / h
● Ibanga lokukhuselaIP68
● Ukunyanzeliswa kokukhupha:> 1010Ω
● Iqondo lokusebenza:-45 ukuya kwi-80 ℃
● Ukungqinelana:Ngcono kune- ± 1.5%
● Umgca:Ingcono kune ± 1%
● Ukuphindaphinda:Ingcono kune ± 1%
● Ukunyamezelana ngokuchanekileyo:Ngcono kune-± 2.5%
Ukuqukumbela
Itekhnoloji ye-Co., i-LTD imele ngaphambili kwetekhnoloji ye-WIM, ihambisa izisombululo ezinobuchule nezinokuthenjwa zolawulo lwezibonelelo zangoku. Iimveliso zethu eziphezulu, ngakumbi izinzwa zetyhubhu, qinisekisa ukuba ziphezulu kwaye ziqinile, zenza ukuba zibe nokungabinakho ukulawulwa ngokusebenzayo, ubunzima bomzi-mveliso, nokukhusela ibhulorho. Ngokukhetha imeko, utyalomali kwikamva leenkqubo ezichanekileyo nezingakhuselekileyo zokuhamba.
Itekhnoloji ye-Co., Ltd
E-mail: info@enviko-tech.com
https: //wwwwbrekotech.com
I-Cheng Offer: Nomb.
I-Ofisi yeHong Kong: 8F, Cheung Wang, i-251 San Wan Wit, Hong Kong
Itekhnoloji ye-Chengdutoko. Ngokuzibophelela kokugqwesa nokuchaneka, i-iftoto ibonelela ngezisombululo eziphambili zolawulo lwezithuthi, ubunzima bomzi-mveliso, kunye nokubekwa kweliso kwimpilo yolwakhiwo. Iimveliso zethu zokusika, kubandakanya i-Piezoelectric ye-Piezomic yenzuzo, zenzelwe ukudibana nemigangatho ephezulu yokuchaneka nokunyaniseka.
IXESHA LOKUQALA: UJUL-24-2024
